Flowcase
The bag has a place of its own: protected inside the housing instead of hanging visibly on the frame or squeezed in somewhere between. The tube always runs downhill, odours stay in, and one glance shows the level. Planned in a range of colours, sizes and motifs.
Hook-in lid
Open the lid, hook in the bag, close it. Done.
Flow system
The tube holder keeps a steady fall, with no kinks and no backflow.
Level indicator
Shows at a glance how full the bag is, even with the lid closed.
Fresh compartment
Two filter sachets keep everything fresh and swap out in seconds.
Simply integrated
Once fitted, it is part of the wheelchair. In your colour.
The Flowcase is in development and exists as a prototype so far. The model shows the current state of the design; details may still change.
Everything in its place.
For many wheelchair users a catheter bag is simply part of daily life. It rarely has a proper place, though: either it hangs visibly on the frame, or it gets squeezed in somewhere — behind the upholstery, under the seat, into a bag. There the tube kinks, flow backs up, and in summer you can smell it.
The Flowcase gives it a place of its own: a housing in the shape language of the wheelchair, where the bag hangs correctly, the tube runs correctly and handling stays simple. Nothing dangles, nothing is squashed, nothing catches the eye.
Three things that make every day easier.
Always sits right
The housing sets the shape: hooked in, the bag sits correctly on its own — upright, with the tube falling away, invisible from outside. Nothing slips.
No backflow
A tube that runs uphill anywhere backs up. The channel in the Flowcase keeps the fall from the connection all the way to the bag, so it runs as it should.
Odours stay in
The housing closes, and two filter sachets work away in the freshness compartment. Any standard ones fit, or a few drops of scented oil. Replacing them takes seconds.
Colour, size, motif:
Made to fit.
The Flowcase only helps when it fits the individual wheelchair and the individual catheter, in form and in function — and that is hard to cover with a single version. The next step is therefore a configurator: you enter catheter, wheelchair and the motif you want, and get the Flowcase that matches. Until then it stays a prototype.
- 1
Made to measure
Height, width and depth follow your catheter bag.
- 2
Connection to the wheelchair
So the Flowcase holds securely, you pick the connector that fits your wheelchair.
- 3
Motif
Either in the colour and shape language of your wheelchair — or entirely as you imagine it.

Still a prototype. Conversations welcome.
So far the Flowcase exists as a prototype that we keep developing. At some point you should be able to match colour, size and motif to your own wheelchair and order it directly. That point has not arrived. If you are interested anyway, do write and tell us which wheelchair you use and what would matter to you. That helps us build the Flowcase in the right direction.
Register interest





